Three-Way High Directivity
Line Array Element
Line Array Element
Extraordinary Performance in a Compact Format
VTX V20 features the advanced technology and extraordinary performance of the groundbreaking VTX V25 in a smaller format, high power density 3-way system complemented by a new suspension system that provides efficient transport, fast setup and precise configuration. All VTX V20 components have been specifically engineered to provide stable 105 degree horizontal coverage and effective line source array coupling in the vertical plane while delivering linear, transparent sound up to surprisingly high output levels for its diminutive size.
| Product Shipping |
|
Product Description
REFINED RBI WAVEGUIDE
Improved Horizontal Coverage
Improved Horizontal Coverage
JBL’s patented Radiation Boundary Integrator combines the high frequency and mid-range sections of the VTX V20 so the transition across each band is uninterrupted, undistorted and seamless.
DIFFERENTIAL DRIVE® TECHNNOLOGY
Enhanced Performance and Dramatically Reduced Driver Weight
Enhanced Performance and Dramatically Reduced Driver Weight
JBL’s exclusive dual voice coil, dual magnetic gap Differential Drive technology is at the core of all VTX models, dramatically reducing driver weight while greatly enhancing all critical performance parameters: frequency response, power output and distortion.
System Integration and Management
With the VTX Series you are not just using a product, you are gaining access to an expert system. Tools for system design and all the components to analyze, configure, set up and control a VTX system are all part of the JBL commitment to total system integration and support. The goal is maximum efficiency and the highest possible level of performance in any venue, anywhere in the world.
Training and Support
In addition to designing the most sophisticated sound reinforcement system available, JBL Professional provides the expertise to achieve the maximum performance possible. Our 65+ years of expertise in the use of systems in venues around the world is an invaluable resource that is at the core of our training curriculum, helping you to maximize both the use and your investment in the VTX System.
Visit www.jblpro.com/vertectraining for latest training dates and registration.
| System type | Quad- or Bi-Amplified 3-Way High Directivity Line Array Element with D2 Technology | |
| Components | 2 x 2261H Differential Drive® 10″ 4 x 2164H Ultra-Linear 5″ 3 x D2415K Dual Diaphragm Compression Drivers |
|
| Horizontal Coverage (-6 dB) | 105 deg | |
| Vertical Coverage | Array shape dependent (0 – 12.5 deg inter-enclosure angles) | |
| Frequency Range (-10 dB) | 60 Hz – 20 kHz (short throw mode, free field) | |
| Nominal Section Impedances | 2 x 8 ohms LF, 8 ohms MF, 8 ohms HF | |
| Continuous Power Rating (Active Mode) | 1200 W LF, 550 W MF, 315 W HF | |
| Dimensions (H x W x D) | 279.9 x 911.4 x 402.2 (mm) 11.0 x 35.9 x 15.8 (in) |
|
| Net Weight | 40 kg (88 lbs) |
VTX-V20-AF ARRAY FRAME
Array Frame used for suspending or ground stacking VTX V20 or VTX S25 enclosures. Includes height-adjustable leveling feet, optional extension bar available.
Features:
- Compatible with VTX V20 and VTX S25
- 11 pick points available for single point suspension
- Flexible front-to-back or side-by-side pick point options
- Supports up to 24 cabinets (array geometry dependent)
Included:
- VTX-V20-AF Array Frame
- 4 x adjustable feet for ground stacking applications
Spec Sheet
2D DrawingsVTX-V20-AF-EB EXTENSION BAR
Extension Bar accessory used in conjunction with the VTX-V20-AF array frame for deploying VTX V20 systems in either compression or tension mode. Five extension bar attachment options provide variable pick point separation (2-point suspension) and added flexibility for single point suspension. The extension bar can be front or rear-mounted for increased array up-tilt or down-tilt, respectively. When rear-mounted, provides an attachment point for compression suspension. A single extension bar can be installed in the array frame central tube, or alternatively, a pair of extension bars can be front or rear-mounted in left/right array frame tubes. Single or dual extension bars can also be front or rear-mounted in Ground Stack applications for extra stability and a wider range of array tilt angle options.
Included:
- 1 x VTX-V20-AF-EB
- 1 x Adjustable leveling foot used for ground stacking applications
- 2 x Quick Release Pins (QRP) for securing the extension bar to the array frame
VTX-V20-PB PULL BACK ACCESSORY
Pull Back accessory for attachment to bottom V20 enclosure to facilitate compression suspension of VTX V20 arrays. Compression can be implemented using a separate chain motor and suspension point (Rear Motor Pullback) or by using an optional VTX-V20-LH chain lever hoist or chain motor that is attached to the VTX-V20-AF-EB extension bar (Extension Bar Pullback).
Included:
- Central pullback bar including two captive Quick Release Pins (QRPs) on lanyards
- Two left/right adapter brackets for connection to the bottom VTX V20 cabinet and the central spreader bar
- 2 x 5/8” shackles for attaching spreader bar to chain bridle
- 1 x 18” dual leg chain bridle with locking safety hooks and upper master link for attachment of compression device
VTX-V20-LF LEVER HOIST
Factory-approved manual lever hoist for compression of VTX V20 systems. The CM Series 653 for use with VTX V20 is a 3/4 ton model with 20’ of chain length for compressing arrays of up to 20 cabinets with no additional extension hardware needed.
Included:
- 1 x CM Lever Hoist (3/4 ton rating) with 20′ of chain
VTX-V20-DF DOWN FILL ADAPTER
Designed to facilitate fast attachment and precise alignment of VTX V20 and V25-II / V25-II-CS systems, the VTX V20-DF is a lightweight solution for providing wider coverage at the bottom of VTX V25-II / V25-II-CS arrays. Lightweight design with multiple options for angle between V25-II / V25-II-CS and V20 (3.5deg, 7.5deg, 11deg). Able to be used as a down-fill adapter frame for V25-II arrays, or as a downfill adapter frame + pullback frame for compression of VTX V25-II-CS arrays with V20 downfill. Supports up to 6x VTX V20 cabinets suspended underneath VTX V25-II / V25-II-CS.
Features:
- Angle options: 3.5deg, 7.5deg, 11deg
- Lightweight design
- Precise HF exit alignment between V25-II and V20
- Support for up to 6x VTX V20 cabinets
VTX-V20-VT VERTICAL TRANSPORTER
The VTX-V20-VT vertical transporter is a simple and cost-effective solution for vertically transporting VTX V20 enclosures in blocks of 3 or 4 cabinets high. Measuring 35” wide by 16” deep, the VTX-V20-VT will travel 5 across (length-wise) in standard 90” trucks.
Features:
- Can transport 3x or 4x V20 enclosures
- Heavy duty locking casters
- Stackable
- Dimensioned for efficient truck pack
Included:
- 1 x VTX-V20-VT
VTX-V20-VT VERTICAL TRANSPORTER COVER
Reinforced, padded protective cover for 3x or 4x VTX V20 enclosures when transported vertically.
Features:
- Handle cutouts, heavy-duty zippers
- Modular design, can be used with 3x or 4x VTX V20 enclosures
- Rear panel access flaps for input connectors
- Speaker cabinets can be tested without fully removing the cover
Included:
- 1 x VTX-V20-VT-CVR
VTX-V20-VT-CVRW VERTICAL TRANSPORTER COVER WRAP
Reinforced, padded protective cover for 3x or 4x VTX-V20 enclosures plus VTX-V20-AF array frame when transported vertically. The cover features on open top design that allows the array frame to remain attached during transport.
Features:
- Handle cutouts, heavy-duty zippers
- Modular design, can be used with 3x or 4x VTX V20 enclosures plus VTX-V20-AF array frame
- Rear panel access flaps for input connectors
- Speaker cabinets can be tested without fully removing the cover
Included:
- 1 x VTX-V20-VT-CVRW
V20 NEWS
